| Customization: | Available |
|---|---|
| Type: | Electrochemical Gas Sensor |
| Conductivity Type: | Surface Type |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alphasense Sulfur Dioxide gas sensors operate using proven fuel cell technology.
Sensors are available in the following sizes:
A: 20mm diameter, the industry standard size for portable gas detectors
B: 32mm diameter package, the best choice for fixed site applications
D: miniature, with proven long-term performance. Sensors designed for the next generation of portable gas detectors.
The SO2 range provides OEMs with reliable sensors for use in a variety of applications. Strong signal levels combined with low zero current allows resolution below 1ppm and an operating range for safety applications up to 2,000ppm. The sensors are designed for use in both fixed site and portable instrumentation.
The SO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.
| SO2-B4 Sulfur Dioxide Sensor SO2 Sensor PERFORMANCE | ||
| Sensitivity | nA/ppm at 2ppm SO2 | 275 to 475 |
| Response time | t90 (s) from zero to 2ppm SO2 | < 30 |
| Zero current | nA in zero air at 20ºC | |
| Noise* | ±2 standard deviations (ppb equivalent) | 5 |
| Range | ppm limit of performance warranty | 100 |
| Linearity | ppb error at 100ppm SO2, linear at zero and 10ppm SO2 | 0 to -2 |
| Overgas limit | maximum ppm for stable response to gas pulse | 200 |
| * Tested with Alphasense ISB low noise circuit | ||
| SO2-B4 Sulfur Dioxide Sensor SO2 Sensor LIFETIME | ||
| Zero drift | ppb equivalent change/year in lab air | < ±20 |
| Sensitivity drift | % change/year in lab air, monthly test | < ±15 |
| Operating life | months until 50% original signal (24 month warranted) | > 36 |
| SO2-B4 Sulfur Dioxide Sensor SO2 Sensor ENVIRONMENTAL | ||
| Sensitivity @ -20ºC | (% output @ -20ºC/output @ 20ºC) @ 2ppm SO2 | 70 to 82 |
| Sensitivity @ 50ºC | (% output @ 50ºC/output @ 20ºC) @ 2ppm SO2 | 95 to 110 |
| Zero @ -20ºC | nA change from 20ºC | 0 to -10 |
| Zero @ 50ºC | nA change from 20ºC | 10 to 30 |
| SO2-B4 Sulfur Dioxide Sensor SO2 Sensor CROSS SENSITIVITY | ||
| Filter capacity | ppm·hrs | 450 |
| H2S | sensitivity % measured gas @ 5ppm H2S | < 2 |
| NO2 | sensitivity % measured gas @ 5ppm NO2 | < -160 |
| Cl2 | sensitivity % measured gas @ 5ppm Cl2 | < -40 |
| NO | sensitivity % measured gas @ 5ppm NO | < -2 |
| CO | sensitivity % measured gas @ 5ppm CO | < 2 |
| H2 | sensitivity % measured gas @ 100ppm H2 | < 0.5 |
| C2H4 | sensitivity % measured gas @ 100ppm C2H4 | < 1 |
| NH3 | sensitivity % measured gas @ 20ppm NH3 | < 0.1 |
| CO2 | sensitivity % measured gas @ 5% CO2 | < 0.1 |
| SO2-B4 Sulfur Dioxide Sensor SO2 Sensor KEY SPECIFICATIONS | ||
| Temperature range | ºC | -30 to 50 |
| Pressure range | kPa | 80 to 120 |
| Humidity range | % rh continuous (see note below) | 15 to 90 |
| Storage period | months @ 3 to 20°C (stored in sealed pot) | 6 |
| Load Resistor | Ω (ISB circuit is recommended) | 33 to 100 |
| Weight | g | < 13 |
Matched Transmitter board for SO2-B4 SO2 Sensor
Individual Sensor Board (ISB) Alphasense B4 4-Electrode Gas Sensors
The Individual Sensor Board (ISB) is designed for use with the Alphasense B4 family of four-electrode gas sensors. This potentiostat provides a dual channel voltage output.
A low noise bandgap provides the bias voltage for NO sensors and the ISB can measure both oxidising (CO, H2S, SO2 and NO) and reducing (O3 and NO2) gases.
The ISB is configured for specific sensors: NO, NO2, O3 and CO / H2S / SO2 .
Designed for low power applications, the ISB requires 3.5 to 6.4 stable DC supply at only 1mA.
Beijing Zetron Technology Co., Ltd, formerly Beijing Senre Technology Co., Ltd was founded in 2006, located in Beijing with convenient transportation access. We have almost 16 years experience in the retail, import and export of gas detection and monitoring equipment.
){kind=link}