Ta-201e Online Toc Analyser for Process Water and Purification Systems

• Customization: Available
• After-sales Service: We Provide After Sale Services.
• Warranty: 1 Year
• Model NO.: TA-201E
• Transport Package: Paper
• Specification: 25*32*35cm
• Trademark: Zetron
• Origin: China
• HS Code: 9027100090
• Package Size: 30.00cm * 40.00cm * 40.00cm
• Package Gross Weight: 5.000kg

Product Description

TA-201E Online TOC Analyser for Process Water and Purification Systems

Product Description

 

TA-201E adopts the high-temperature catalytic combustion oxidation method, the specimen together with the purification gas (high purity oxygen) are introduced into the high-temperature combustion tube and the low-temperature reaction tube respectively, the specimen through the high-temperature combustion tube is catalytically oxidised by the high temperature, and the organic carbon and inorganic carbon therein are converted into carbon dioxide, and the inorganic carbon therein is decomposed into carbon dioxide after the acidification of the specimen through the low-temperature reaction tube; the carbon dioxide produced by both reaction tubes is introduced into the non-dispersive infrared gas detector NDIR in turn through carrier gas transport, and COThe carbon dioxide produced in the two reaction tubes is sequentially introduced into the non-dispersive infrared gas detector (NDIR) through gas transport, and CO2 is detected.Thus, the total carbon (TC) and inorganic carbon (IC) in the water are measured separately.The difference between TC and IC is the total organic carbon (TOC).That is: TOC = TC - IC

 

Product Parameters

 

Model	TA-201E
Measurement range	0~1000mg/L (non-dilution state), dilution state can reach 0~30000mg/L
Repeatability	≤ 3%
Indication error	TC; ±0.1%F.S or ±5% (the larger one) IC; ±0.1%F.S or ±4% (the larger one)
Linearity	R2≥99.9%
Lower detection limit	0.5mg/L
Analysis time	2~4min
Injection volume	10μL~500μL
External storage	U disk
Power supply	AC 220V±10% 50/60Hz (reliable grounding required)
Power	1000W when the electric furnace is heated
Ambient temperature	0~40ºC
Relative humidity	10~85%
Setting location	Indoor
Gas source	high-purity oxygen (≥99.999%)
High purity Water	Carbon dioxide-free water (TOC≤0.5mg/L)
Acid reagent	10% phosphoric acid
Instrument placement	There must be 20cm of space around for heat dissipation, and no items can be stacked on top
Combustion temperature	680ºC~1200ºC

Features

1. High-temperature catalytic oxidation can efficiently oxidize difficult-to-digest organic carbon, making the product easy to analyze high-concentration TOC samples;
2. Rapid analysis (1-4 minutes);
3. Higher safety, the combustion furnace heating adopts multiple protections, and the overheating protection circuit is independent of the temperature control system. Overheating can automatically cut off the heating to ensure product safety;
4. Real-time flow monitoring to maintain flow stability and ensure data reliability;
5. The pipeline can be cleaned and purged in all directions. The internal circuit can be cleaned according to the needs and operating requirements, which greatly reduces the failure rate and instrument maintenance time;
6. The instrument automatically discharges waste, automatically discharges and feeds acid, and the acid inlet amount is controlled stably;
7. Less sample and reagent consumption, each measurement requires 0.5μL of high-purity water, 2ml of acid reagent (for IC testing), and about 2000ml of high-purity oxygen (under standard conditions, flow rate 100ml/min, ventilation time 20min.);
8. The CO2 detection of the NDIR detector has good linearity and high accuracy. The CO2 signal is converted into a peak curve, and then the built-in data processor calculates the TOC value (the difference between TC and IC);
9. The catalytic combustion oxidation method has strong oxidation ability and can oxidize almost all organic matter with stable performance. The 680ºC combustion method is almost below the melting point of all salts, which can extend the life of the catalyst and combustion tube, which is especially important when the measurement object is a water sample containing salt;
10. The instrument uses a high-resolution 7-inch touch wide screen and adopts an intelligent system for easy operation.

 

Application

 

Determination of total organic carbon (TOC) in surface water, groundwater, domestic sewage, industrial wastewater, applied to environmental monitoring, urban water supply and drainage, disease control, chemical power and other industries.

 

Certifications

Company Profile

Beijing Zetron Technology Co., Ltd, formerly Beijing Senre Technology Co., Ltd was founded in 2006, located in Beijing with convenient transportation access. We have almost 16 years experience in the retail, import and export of gas detection and monitoring equipment.

This experience has enabled us to form an organisation based on knowledge and expertise and have allowed us to supply a range of gas detectors and monitors that are tailored to our customers needs and budgets. Our aim is to provide the best values products with high quality and style.To provide the new affordable and complete service for gas detection needs for the industrial, engineering and shipping market and our friendly staff are here to help with advice and prices. So far, we have customers/buyers from over 20 countries/regions like Bulgaria, Brazil, Canada, China, Colombia, Germany, Iraq, Japan, Philippines, Russian Federation, Singapore, Taiwan, Thailand, Uruguay, United States, Ukraine, Vietnam, etc.

The list of countries still expanding.....!!

We are committed to become the International Well Know Provider to provide similar or better alternative, original merchandises & service to meet customers' needs, requirements and solutions.

 

Every customer is important to us and we strive to satisfy all our Customers needs and expectations.

Local and International Distributors, Dealers and Resellers are Welcomed! Please contact us at the homepage.
 

FAQ